Cara mendownload aplikasi LINE di laptop sangatlah mudah. Jngn lupa like, komen, berlangganan ya.
- Cara Mengaktifkan Notifikasi Wa Di Hp Samsung
- Di Cara Rubino Architects
- Cara Mengdawnlod Wa Di Hp 302 Ink
Cara Mengaktifkan Notifikasi Wa Di Hp Samsung
This document provides the procedure to install the optional 550-sheet paper feeder for the following printers:
Di Cara Rubino Architects
- HP LaserJet Pro M305
- HP LaserJet Pro M403
- HP LaserJet Pro M405
- HP LaserJet Pro MFP M426
- HP LaserJet Pro MFP M428
Cara Mengdawnlod Wa Di Hp 302 Ink
- Disconnect the power cord from the outlet.
- Disconnect the USB or network cable.
- Remove the shipping tape from the 550-sheet paper feeder.
- Place the 550-sheet paper feeder on a sturdy surface, and then place the printer on the tray. Use the alignment pins on top of the tray to position the printer.
note:
Figure : Position the printer on the tray using the alignment pins - Connect the power cord to the outlet.
- Press the Power button to turn on the printer.
- Open the tray.
- Adjust the paper guides by squeezing the adjustment latches and sliding the guides to the size of the paper being used.
- Load paper into the tray. Check the paper to verify the guides lightly touch the stack, but do not bend it.
note:
To prevent jams, do not overfill the tray. Be sure that the top of the stack is below the tray full indicator. - Close the tray.
- To configure the accessory in the software print driver, refer to the information below that applies to your specific operating system.macOS: The list of installed options should automatically update during the first print job after installing the accessory. If not, perform the following steps:
- Select Print & Scan (or Printers & Scanners).
- Select the printer, click Options & Supplies, and then click the Options tab.
Windows® 10, 8.1, 8, and 7: The print driver should automatically detect the added accessory when a print job is sent to the printer. If the accessory is not detected by the print driver after a print job has been sent, perform the following steps to manually configure the accessory:- In Windows 10, click the search box on the bottom left taskbar and type control panel, and then click Control Panel from the list of results.
- In Windows 8 and 8.1, scroll to the bottom left corner of the screen, right-click the Windows icon that displays, and then select Control Panel.
- In Windows 7, click the Start icon, and then click Control Panel.
- Under Hardware and Sound, select View devices and printers.
- Right-click the name of the printer, and then select Printer Properties.
- In the Installable Options section, manually install the accessory by opening the appropriate category and selecting the accessory.
- Make sure the printer is turned on and connected to the computer or network.
- Open the Windows Start menu, and then click Devices and Printers (or Printers and Faxes for XP).
- Right-click the name of the printer, and select Printer Properties (or Properties for XP).
- Click the Installable Options section.
- In the drop-down menu next to Automatic Configuration, select Update Now.
note:
If using a USB connection, manually configure the accessory by opening the appropriate category and selecting the accessory.